PartsTable
Technical Data Sheet
Download PDF

914422-1 — BRACKET,ANGLE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

914422-1: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 2.500 INCHES NOMINAL IN, first_leg_length: 4.200 INCHES NOMINAL IN, second_leg_style: SQUARE. This part is cataloged in the U.S.

Government catalog under NSN 5325-00-544-4504, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
914422-1
NSN: 5325-00-544-4504
NIINs: 005444504, 012107970
FSC: 5325 — Fastening Devices
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width2.500 INCHES NOMINAL IN
first_leg_length4.200 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width4.750 INCHES NOMINAL IN
special_featuresRIGHT HAND
style_designatorOFFSET ANGLE
second_leg_length5.750 INCHES NOMINAL IN
mounting_hole_typePLAIN
first_leg_thickness0.250 INCHES NOMINAL IN
NSN5325-00-544-4504
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 914422-1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DRIVE TYPE: CROSS RECESS
•
MATERIAL ACCOMMODATED THICKNESS: 0.080 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
•
TURNLOCK STUD SHANK STYLE: STUD SHANK
•
DIAMETER: 0.300 INCHES NOMINAL IN
•
SECURING DEVICE TYPE: WASHER
•
TURNLOCK STUD HEAD STYLE: FILLISTER
•
STUD SHANK MAJOR DIAMETER: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DRIVE TYPECROSS RECESS
MATERIAL ACCOMMODATED THICKNESS0.080 INCHES MINIMUM AND 0.109 INCHES MAXIMUM IN
TURNLOCK STUD SHANK STYLESTUD SHANK
DIAMETER0.300 INCHES NOMINAL IN
SECURING DEVICE TYPEWASHER
TURNLOCK STUD HEAD STYLEFILLISTER
STUD SHANK MAJOR DIAMETER0.125 INCHES NOMINAL IN
SPECIAL FEATURESWITH NYLON WASHER
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
107232-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5S1-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 914422-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 914422-1?
914422-1 is a BRACKET,ANGLE.
What parts can replace 914422-1?
There are 2 known substitutes for 914422-1: 107232-6, 5S1-6. Substitute compatibility should be verified for your specific system.
What is the NSN for 914422-1?
914422-1 is cataloged in the U.S. Government catalog under NSN 5325-00-544-4504. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 914422-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.