PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 914127
914127 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 3.250 INCHES NOMINAL IN, length: 5.625 INCHES NOMINAL IN, material: STEEL, hole_diameter: 0.343 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN, body_thickness: 0.125 INCHES NOMINAL IN, securing_device_type: THREADED FASTENER. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-447-3477, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
914127
NSN: 5340-00-447-3477
FSC: 5340
CAGE: 73331 — GENERAL MOTORS CORP FISHER GUIDE DIV (USA)
SPECIFICATIONS
width3.250 INCHES NOMINAL IN
length5.625 INCHES NOMINAL IN
materialSTEEL
hole_diameter0.343 INCHES MINIMUM AND 0.359 INCHES MAXIMUM IN
body_thickness0.125 INCHES NOMINAL IN
securing_device_typeTHREADED FASTENER
peripheral_shape_styleOVAL, MULTI HOLES
hole_quantity_along_width2
hole_quantity_along_length4
cross-sectional_shape_styleFLAT
mounting_opening_shape_styleUNTHREADED HOLE
material_document_and_classificationQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-447-3477
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 914127 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STOCK DIAMETER: 0.050 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
WIDTH: 1.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STOCK DIAMETER0.050 INCHES NOMINAL IN
MATERIALSTEEL
WIDTH1.250 INCHES NOMINAL IN
OVERALL HEIGHT1.594 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
2322T2Upgraded Successor
successor cross-reference
successor
30-96-5Upgraded Successor
successor cross-reference
successor
7520956Upgraded Successor
successor cross-reference
successor
11892600Interchangeable
interchangeable cross-reference
interchangeable
118926Interchangeable
interchangeable cross-reference
interchangeable
1189-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 914127?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 914127?
914127 is a CLIP,RETAINING.
What parts can replace 914127?
There are 12 known substitutes for 914127: 2322T2, 30-96-5, 7520956 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 914127?
914127 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-447-3477. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 914127

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026