PartsTable
Technical Data Sheet
PartsTable / O-RING / 914-29
914-29 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SWITCH,TOGGLE is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, body_style: HOLE MOUNT, body_width: 0.365 INCHES NOMINAL IN, body_height: 0.395 INCHES NOMINAL IN, body_length: 0.500 INCHES NOMINAL IN, actuator_style: PIVOTED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-580-4394, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
914-29
NSN: 5331-00-580-4394
FSC: 5331 — O-RING
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
body_styleHOLE MOUNT
body_width0.365 INCHES NOMINAL IN
body_height0.395 INCHES NOMINAL IN
body_length0.500 INCHES NOMINAL IN
actuator_stylePIVOTED
actuator_width0.365 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
actuator_height0.487 INCHES NOMINAL IN
actuator_length0.531 INCHES NOMINAL IN
outside_diameter1.734 INCHES MINIMUM AND 1.776 INCHES MAXIMUM IN
special_featuresMC2X THREE STAGE VENOUS CANNULAE;29/29/29 FR (9.7/9.7/9.7 MM) 3/8 IN CONNECTION, NON-VENTED, 15 IN (38.1CM) MM
NSN5331-00-580-4394
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 914-29 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 1.539 INCHES MINIMUM AND 1.559 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.734 INCHES MINIMUM AND 1.776 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.539 INCHES MINIMUM AND 1.559 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.734 INCHES MINIMUM AND 1.776 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
199986Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-129Interchangeable
interchangeable cross-reference
interchangeable
ST1050-129Interchangeable
interchangeable cross-reference
interchangeable
108838Interchangeable
interchangeable cross-reference
interchangeable
AS568-129MILP5516-70DURMInterchangeable
interchangeable cross-reference
interchangeable
V3D10075PC29CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 914-29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 914-29?
914-29 is a SWITCH,TOGGLE.
What parts can replace 914-29?
There are 19 known substitutes for 914-29: 199986, M83248/1-129, ST1050-129 and 16 more. Substitute compatibility should be verified for your specific system.
Is 914-29 still available?
914-29 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 914-29

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026