PartsTable
Technical Data Sheet
Download PDF

914-11 — O-RING

✓ Government record, cited
Verbatim · ORING SEAL
PRODUCT OVERVIEW

914-11: O-RING.

- Specifically designed for use as write-once media in ISO Standard 5.25" multi-function drives, data cannot be altered without detection - Certified to withstand over 100,000 insertions in optical disk libraries/jukeboxes, and archival life exceeds 40 years - Unique features like the slip ring and plastic centered hub add unparalleled reliability, especially in jukebox environments - Special protective coating to safeguard information for a lifetime of service. - Proprietary anti-static coating that helps reduce electrostatic charges that can cause problems in jukebox/library mechanisms This part is cataloged in the U.S. Government catalog under NSN 5331-00-007-6143, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
914-11
NSN: 5331-00-007-6143
NIINs: 000076143, 005992752
FSC: 5331 — O-ring
CAGE: 05214 — COMPUTER MACHINING TECHNOLOGY CORP (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
center_hole_diameter1.045 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
elongation_percentage80 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-007-6143
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 914-11 MFR: Verbatim ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.175 INCHES MINIMUM AND 1.207 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.045 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.175 INCHES MINIMUM AND 1.207 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.045 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 8
MS29513-023ESReference document
Same NSN cross-reference
Reference document — Secondary reference
MILP5315Reference document
Same NSN cross-reference
Reference document — Secondary reference
10V60-141-023Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2661058B023Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MS29513-23Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2-023 N602-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 914-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 914-11?
914-11 is a O-RING manufactured by Verbatim.
What parts can replace 914-11?
There are 8 known substitutes for 914-11: MS29513-023ES, MILP5315, 10V60-141-023 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 914-11?
914-11 is cataloged in the U.S. Government catalog under NSN 5331-00-007-6143. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 914-11