PartsTable
Technical Data Sheet
Download PDF

9139M82P01 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9139M82P01: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: SLEEVE, nut_length: 0.158 INCHES MAXIMUM IN, temp_rating: 250.0 FAHRENHEIT NOMINAL DEGF, nut_diameter: 0.430 INCHES MINIMUM IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-077-2603, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9139M82P01
NSN: 5310-01-077-2603
FSC: 5310 — Nuts and Washers
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSLEEVE
nut_length0.158 INCHES MAXIMUM IN
temp_rating250.0 FAHRENHEIT NOMINAL DEGF
nut_diameter0.430 INCHES MINIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
flange_thickness0.170 INCHES NOMINAL IN
special_featuresNYLON SELF-LOCKING INSERT DEVICE
thread_directionRIGHT-HAND
nominal_thread_size0.250 INCHES IN
cross-sectional_shapeROUND NUT
NSN5310-01-077-2603
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9139M82P01 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
•
NUT LENGTH: 0.158 INCHES MAXIMUM IN
•
FLANGE THICKNESS: 0.170 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
TEMP RATING: 250.0 FAHRENHEIT NOMINAL DEGF
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
NUT LENGTH0.158 INCHES MAXIMUM IN
FLANGE THICKNESS0.170 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING250.0 FAHRENHEIT NOMINAL DEGF
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT DIAMETER0.430 INCHES MINIMUM IN
CROSS-SECTIONAL SHAPEHEXAGONAL FLANGE
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
9139M82P02Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9139M82P01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9139M82P01?
9139M82P01 is a NUT,SLEEVE.
What parts can replace 9139M82P01?
There is 1 known substitute for 9139M82P01: 9139M82P02. Substitute compatibility should be verified for your specific system.
What is the NSN for 9139M82P01?
9139M82P01 is cataloged in the U.S. Government catalog under NSN 5310-01-077-2603. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9139M82P01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.