PartsTable
Technical Data Sheet
Download PDF

913786 — DISPLAY UNIT

✓ Government record, cited
— · STORAGE_HDD · 3.5_SATA_HDD
PRODUCT OVERVIEW

913786: DISPLAY UNIT.

The DISPLAY UNIT is a the manufacturer industrial component. Key specifications include diameter: 0.660 INCHES NOMINAL IN, overall_width: 1.188 INCHES NOMINAL IN, material_thickness: 1.188 INCHES NOMINAL IN, loop_inside_diameter: 1.375 INCHES NOMINAL IN, end_item_identification: PROPHET SPIRAL 1,AN/MLQ-42,COUNTERMEASURES SET, distance_from_loop_center_to_tongue_end: 1.688 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-752-1608, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 913786
NSN: 5340-00-752-1608
NIINs: 007521608, 015659732
FSC: 5340 — Hardware, Commercial
CAGE: 58275 — SASCO INC CANADIAN DIV
SPECIFICATIONS
diameter0.660 INCHES NOMINAL IN
overall_width1.188 INCHES NOMINAL IN
special_featuresCONTROL-DISPLAY UNIT IS PART OF THE 10 METER MAST ASSEMBLY PN:914194,AND IS USED BY THE OPERATOR TO RAISE AND LOWER THE MAST.IT IS MANUFACTURED BY THE WILL-BURT COMPANY,INC.
material_thickness1.188 INCHES NOMINAL IN
loop_inside_diameter1.375 INCHES NOMINAL IN
end_item_identificationPROPHET SPIRAL 1,AN/MLQ-42,COUNTERMEASURES SET
distance_from_loop_center_to_tongue_end1.688 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyCONTROL-DISPLAY UNIT
center_to_center_distance_between_loop_and_mounting_hole1.141 INCHES NOMINAL IN
NSN5340-00-752-1608
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 913786 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 913786 MFR OEM
KEY FEATURES
•
DIAMETER: 0.660 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 1.188 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.688 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 1.141 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 1.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DIAMETER0.660 INCHES NOMINAL IN
OVERALL WIDTH1.188 INCHES NOMINAL IN
MATERIAL THICKNESS1.188 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.688 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.141 INCHES NOMINAL IN
LOOP INSIDE DIAMETER1.375 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
890D1Reference document
Same NSN cross-reference
Reference document — Secondary reference
7521608Reference document
Same NSN cross-reference
Reference document — Secondary reference
SD913786Reference document
Same NSN cross-reference
Reference document — Secondary reference
24MN7Reference document
Same NSN cross-reference
Reference document — Secondary reference
5340007521608Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 913786?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 913786?
913786 is a DISPLAY UNIT. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 913786?
There are 5 known substitutes for 913786: 890D1, 7521608, SD913786 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 913786?
913786 is cataloged in the U.S. Government catalog under NSN 5340-00-752-1608. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 913786

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.