PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 913203

913203 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The LEVER,REMOTE CONTROL is a the manufacturer industrial component. Key specifications include material: STEEL, bore_type: PLAIN STRAIGHT, bore_length: 0.965 INCHES MINIMUM AND 0.985 INCHES MAXIMUM IN, bore_diameter: 0.515 INCHES NOMINAL IN, link_end_thickness: 0.625 INCHES NOMINAL IN, shaft_end_thickness: 0.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System under NSN 3110-00-100-0511, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
913203
NSN: 3110-00-100-0511
FSC: 3110
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
materialSTEEL
bore_typePLAIN STRAIGHT
bore_length0.965 INCHES MINIMUM AND 0.985 INCHES MAXIMUM IN
bore_diameter0.515 INCHES NOMINAL IN
link_end_thickness0.625 INCHES NOMINAL IN
shaft_end_thickness0.375 INCHES NOMINAL IN
material_document_and_classificationMIL-S-13048, FS1035-CANCELLED MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-13048, FS1040-CANCELLED MIL SPEC 1ST MATERIAL RESPONSE
NSN3110-00-100-0511
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 913203 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.9380 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
BACKFACE CORNER RADIUS: 0.0630 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
OVERALL WIDTH0.6250 INCHES NOMINAL IN
OUTSIDE DIAMETER1.9380 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
BACKFACE CORNER RADIUS0.0630 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
95J9K0InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1586012InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
4652InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
11164InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
12520InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
50018InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 913203?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 913203?
913203 is a LEVER,REMOTE CONTROL.
What parts can replace 913203?
There are 24 known substitutes for 913203: 95J9K0, 1586012, 4652 and 21 more. Substitute compatibility should be verified for your specific system.
Is 913203 still available?
913203 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 913203

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026