PartsTable
Technical Data Sheet
Download PDF

913164 — PARTS KIT,OVERHAUL,

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

913164: PARTS KIT,OVERHAUL,.

The PARTS KIT,OVERHAUL, is a the manufacturer industrial component. Key specifications include diameter: 1.000 INCHES NOMINAL IN, material: STEEL COMP 1025 OVERALL, head_style: FLAT, undercut_width: 0.250 INCHES NOMINAL IN, first_end_style: SQUARE, effective_length: 3.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-699-8465, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
913164
NSN: 5315-00-699-8465
NIINs: 006998465, 009535822, 012920231
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 58275 — SASCO INC CANADIAN DIV
SPECIFICATIONS
diameter1.000 INCHES NOMINAL IN
materialSTEEL COMP 1025 OVERALL
head_styleFLAT
undercut_width0.250 INCHES NOMINAL IN
first_end_styleSQUARE
effective_length3.000 INCHES NOMINAL IN
special_features1.125 IN. DIA BY 0.062 IN. WASHER FACE ON UNDERSIDE OF HEAD IN
style_designatorGROOVE
pin_head_diameter1.250 INCHES NOMINAL IN
surface_treatmentCADMIUM OR ZINC OVERALL
under_head_length3.625 INCHES NOMINAL IN
undercut_diameter0.750 INCHES NOMINAL IN
NSN5315-00-699-8465
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 913164 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT WIDTH: 0.250 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.750 INCHES NOMINAL IN
•
UNDER HEAD LENGTH: 3.625 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
•
STYLE DESIGNATOR: GROOVE
•
PIN HEAD DIAMETER: 1.250 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
UNDERCUT WIDTH0.250 INCHES NOMINAL IN
UNDERCUT DIAMETER0.750 INCHES NOMINAL IN
UNDER HEAD LENGTH3.625 INCHES NOMINAL IN
FIRST END STYLESQUARE
STYLE DESIGNATORGROOVE
PIN HEAD DIAMETER1.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER1.000 INCHES NOMINAL IN
EFFECTIVE LENGTH3.000 INCHES NOMINAL IN
HEAD STYLEFLAT
SUBSTITUTES & CROSS-REFERENCES 2
5315006998465Reference document
Same NSN cross-reference
Reference document — Informative reference only
1261N2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 913164?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 913164?
913164 is a PARTS KIT,OVERHAUL,.
What parts can replace 913164?
There are 2 known substitutes for 913164: 5315006998465, 1261N2. Substitute compatibility should be verified for your specific system.
What is the NSN for 913164?
913164 is cataloged in the U.S. Government catalog under NSN 5315-00-699-8465. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 913164

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.