PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 91316
91316 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

HOUSING,CYLINDER,PNEUMATIC ACTUA. Key specifications include material: STEEL OVERALL, duty_type: INTERMITTENT, thread_class: 2A SINGLE MOUNTING FACILITY A, hole_diameter: 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, overall_width: 1.030 INCHES NOMINAL IN, overall_height: 2.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-017-8532, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
91316
NSN: 5310-00-017-8532
FSC: 5310
CAGE: 78452 — MICRODOT INC EVERLOCK CHICAGO DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
duty_typeINTERMITTENT
thread_class2A SINGLE MOUNTING FACILITY A
coil_quantity1
hole_diameter0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
overall_width1.030 INCHES NOMINAL IN
overall_height2.000 INCHES NOMINAL IN
overall_length20.0 INCHES NOMINAL IN
outside_diameter0.865 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
special_featuresHANDLE- KNURLED.
style_designatorRATCHET
winding_quantity1
NSN5310-00-017-8532
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 91316 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
MATERIAL THICKNESS: 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
HOLE DIAMETER: 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
OUTSIDE DIAMETER: 0.865 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,FS1060 TO FS 1080-CANCELED FED SPEC ALL MATERIAL RESPONSES OVERALL
•
STYLE DESIGNATOR: FLAT EXTERNAL AND INTERNAL TEETH
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
MATERIAL THICKNESS0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
HOLE DIAMETER0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
OUTSIDE DIAMETER0.865 INCHES MINIMUM AND 0.900 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633,FS1060 TO FS 1080-CANCELED FED SPEC ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATORFLAT EXTERNAL AND INTERNAL TEETH
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
91316Interchangeable
interchangeable cross-reference
interchangeable
125105LAInterchangeable
interchangeable cross-reference
interchangeable
553F405G02Interchangeable
interchangeable cross-reference
interchangeable
S36845Interchangeable
interchangeable cross-reference
interchangeable
116-830Interchangeable
interchangeable cross-reference
interchangeable
8747-2CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 91316?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91316?
91316 is a HOUSING,CYLINDER,PNEUMATIC ACTUA.
What parts can replace 91316?
There are 14 known substitutes for 91316: 91316, 125105LA, 553F405G02 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 91316?
91316 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-017-8532. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91316

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026