PartsTable
Technical Data Sheet
PartsTable / O-RING / 91300-015
91300-015 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TRANSFORMER,PULSE is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, body_width: 0.718 INCHES NOMINAL IN, body_height: 0.812 INCHES NOMINAL IN, body_length: 0.718 INCHES NOMINAL IN, inclosure_type: FULLY INCLOSED, mounting_method: TERMINAL SINGLE GROUP. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-1087, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
91300-015
NSN: 5331-00-166-1087
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
body_width0.718 INCHES NOMINAL IN
body_height0.812 INCHES NOMINAL IN
body_length0.718 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
mounting_methodTERMINAL SINGLE GROUP
outside_diameter0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
inductance_rating60.00 MILLIHENRIES NOMINAL SINGLE COMPONENT SINGLE PRIMARY
center_hole_diameter0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
reliability_indicatorNOT ESTABLISHED
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
terminal_type_and_quantity6 WIRE LEAD
NSN5331-00-166-1087
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 91300-015 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
VIT0NXAX015Interchangeable
interchangeable cross-reference
interchangeable
AX015VIT0NInterchangeable
interchangeable cross-reference
interchangeable
110-100-015Interchangeable
interchangeable cross-reference
interchangeable
10128173Interchangeable
interchangeable cross-reference
interchangeable
914-82-1Interchangeable
interchangeable cross-reference
interchangeable
A6526Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 91300-015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91300-015?
91300-015 is a TRANSFORMER,PULSE.
What parts can replace 91300-015?
There are 26 known substitutes for 91300-015: VIT0NXAX015, AX015VIT0N, 110-100-015 and 23 more. Substitute compatibility should be verified for your specific system.
Is 91300-015 still available?
91300-015 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91300-015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026