PartsTable
Technical Data Sheet
PartsTable / O-RING / 91300-014

91300-014 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The TRANSFORMER,PULSE is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 0.825 INCHES NOMINAL IN, bore_style: UNABLE TO DECODEPLAIN BOTH ENDSPLAIN BOTH ENDS, body_height: 0.687 INCHES NOMINAL IN, body_length: 0.825 INCHES NOMINAL IN, design_type: UNABLE TO DECODEHELICAL THIRD GEARHELICAL THIRD GEAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-1086, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
91300-014
NSN: 5331-00-166-1086
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width0.825 INCHES NOMINAL IN
bore_styleUNABLE TO DECODEPLAIN BOTH ENDSPLAIN BOTH ENDS
body_height0.687 INCHES NOMINAL IN
body_length0.825 INCHES NOMINAL IN
design_typeUNABLE TO DECODEHELICAL THIRD GEARHELICAL THIRD GEAR
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
constructionSOLIDSOLID
inclosure_typeFULLY INCLOSED
hardness_rating90.00 SHORE DUROMETER A NOMINAL
mounting_methodTERMINAL SINGLE GROUP
outside_diameter0.629 INCHES NOMINAL IN
NSN5331-00-166-1086
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 91300-014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
OUTSIDE DIAMETER: 0.629 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.482 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 90.00 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
OUTSIDE DIAMETER0.629 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.482 INCHES MINIMUM AND 0.496 INCHES MAXIMUM IN
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
HARDNESS RATING90.00 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
3AX100Interchangeable
interchangeable cross-reference
interchangeable
7-5081 ITEM 54Interchangeable
interchangeable cross-reference
interchangeable
002017Interchangeable
interchangeable cross-reference
interchangeable
AS3209-116Interchangeable
interchangeable cross-reference
interchangeable
5-0-51-08-3Interchangeable
interchangeable cross-reference
interchangeable
QD1004-116Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 91300-014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91300-014?
91300-014 is a TRANSFORMER,PULSE.
What parts can replace 91300-014?
There are 32 known substitutes for 91300-014: 3AX100, 7-5081 ITEM 54, 002017 and 29 more. Substitute compatibility should be verified for your specific system.
Is 91300-014 still available?
91300-014 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91300-014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026