PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 912S0115
912S0115 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, design_type: LOOP ENGAGING, hole_diameter: 0.266 INCHES NOMINAL IN, overall_width: 1.750 INCHES NOMINAL IN, overall_height: 1.625 INCHES NOMINAL IN, operation_method: LEVER HANDLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-325-5701, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
912S0115
NSN: 5340-01-325-5701
FSC: 5340
CAGE: 56672 — SYN-TECH SYSTEM, INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
design_typeLOOP ENGAGING
hole_diameter0.266 INCHES NOMINAL IN
hole_quantity4
overall_width1.750 INCHES NOMINAL IN
overall_height1.625 INCHES NOMINAL IN
operation_methodLEVER HANDLE
engaging_surface_width1.062 INCHES NOMINAL IN
engaging_surface_thickness0.188 INCHES NOMINAL IN
NSN5340-01-325-5701
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 912S0115 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.266 INCHES NOMINAL IN
•
ENGAGING SURFACE THICKNESS: 0.188 INCHES NOMINAL IN
•
HOLE QUANTITY: 4
•
DESIGN TYPE: LOOP ENGAGING
•
ENGAGING SURFACE WIDTH: 1.062 INCHES NOMINAL IN
•
OPERATION METHOD: LEVER HANDLE
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.266 INCHES NOMINAL IN
ENGAGING SURFACE THICKNESS0.188 INCHES NOMINAL IN
HOLE QUANTITY4
OVERALL HEIGHT1.625 INCHES NOMINAL IN
DESIGN TYPELOOP ENGAGING
ENGAGING SURFACE WIDTH1.062 INCHES NOMINAL IN
OPERATION METHODLEVER HANDLE
MATERIALSTEEL CORROSION RESISTING OVERALL
OVERALL WIDTH1.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
53310Upgraded Successor
successor cross-reference
successor
137142Interchangeable
interchangeable cross-reference
interchangeable
345898PC516Interchangeable
interchangeable cross-reference
interchangeable
B94.11MInterchangeable
interchangeable cross-reference
interchangeable
2410 5/32Interchangeable
interchangeable cross-reference
interchangeable
C12052Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 912S0115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 912S0115?
912S0115 is a CATCH,CLAMPING.
What parts can replace 912S0115?
There are 18 known substitutes for 912S0115: 53310, 137142, 345898PC516 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 912S0115?
912S0115 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-325-5701. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 912S0115

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026