PartsTable
Technical Data Sheet
Download PDF

912F0105-3 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

912F0105-3: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 150.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 2.500 INCHES NOMINAL IN, first_leg_length: 0.720 INCHES NOMINAL IN, second_leg_style: END RADIUS AND TAPERED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-385-3772, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
912F0105-3
NSN: 5340-01-385-3772
FSC: 5340 — Hardware, Commercial
CAGE: 56672 — SYN-TECH SYSTEM, INC. (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle150.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width2.500 INCHES NOMINAL IN
first_leg_length0.720 INCHES NOMINAL IN
second_leg_styleEND RADIUS AND TAPERED
second_leg_width2.500 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length0.872 INCHES NOMINAL IN
surface_treatmentPASSIVATE
mounting_hole_typePLAIN
first_leg_thickness0.160 INCHES NOMINAL IN
NSN5340-01-385-3772
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 912F0105-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.590 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 150.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.282 INCHES NOMINAL IN
•
FIRST LEG CORNER RADIUS: 0.130 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 2.500 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 0.872 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.590 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.500 INCHES NOMINAL IN
FIRST LEG ANGLE150.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.282 INCHES NOMINAL IN
FIRST LEG CORNER RADIUS0.130 INCHES NOMINAL IN
SECOND LEG WIDTH2.500 INCHES NOMINAL IN
SECOND LEG LENGTH0.872 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE SLOT
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.980 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 912F0105-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 912F0105-3?
912F0105-3 is a BRACKET,ANGLE.
What is the NSN for 912F0105-3?
912F0105-3 is cataloged in the U.S. Government catalog under NSN 5340-01-385-3772. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 912F0105-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.