PartsTable
Technical Data Sheet
Download PDF

91257A661 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

91257A661: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.938 INCHES NOMINAL IN, thread_length: 1.000 INCHES NOMINAL IN, fastener_length: 2.500 INCHES NOMINAL IN, hardness_rating: 33.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-555-1472, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
91257A661
NSN: 5305-01-555-1472
FSC: 5305 — Screws
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.938 INCHES NOMINAL IN
thread_class2
thread_length1.000 INCHES NOMINAL IN
fastener_length2.500 INCHES NOMINAL IN
hardness_rating33.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentZINC ALLOY OVERALL
width_between_flats0.563 INCHES NOMINAL IN
end_item_identification2320-01-494-7606;LIGHT ARMORED VEHICLE LAV-25A1
nominal_thread_diameter0.375 INCHES IN
NSN5305-01-555-1472
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 91257A661 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.938 INCHES NOMINAL IN
•
FASTENER LENGTH: 2.500 INCHES NOMINAL IN
•
THREAD LENGTH: 1.000 INCHES NOMINAL IN
•
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.563 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.938 INCHES NOMINAL IN
FASTENER LENGTH2.500 INCHES NOMINAL IN
THREAD LENGTH1.000 INCHES NOMINAL IN
HARDNESS RATING33.0 ROCKWELL C MINIMUM AND 39.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.563 INCHES NOMINAL IN
COLORYELLOW OVERALL
SURFACE TREATMENTZINC ALLOY OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
13015301Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 91257A661?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91257A661?
91257A661 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 91257A661?
There is 1 known substitute for 91257A661: 13015301. Substitute compatibility should be verified for your specific system.
What is the NSN for 91257A661?
91257A661 is cataloged in the U.S. Government catalog under NSN 5305-01-555-1472. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91257A661