PartsTable
Technical Data Sheet
Download PDF

91253A730 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

91253A730: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.251 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.938 INCHES NOMINAL IN, thread_length: 1.500 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-566-6400, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
91253A730
NSN: 5305-01-566-6400
FSC: 5305 — Screws
CAGE: 0KVE6 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.251 INCHES NOMINAL IN
thread_class3A A
head_diameter0.938 INCHES NOMINAL IN
thread_length1.500 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN
fastener_length4.500 INCHES NOMINAL IN
hardness_rating39.0 ROCKWELL C MINIMUM OVERALL
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
surface_treatmentOXIDE OVERALL
width_across_flats0.313 INCHES NOMINAL IN
NSN5305-01-566-6400
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 91253A730 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.313 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.251 INCHES NOMINAL IN
•
FASTENER LENGTH: 4.500 INCHES NOMINAL IN
•
THREAD LENGTH: 1.500 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN
•
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.313 INCHES NOMINAL IN
HEAD HEIGHT0.251 INCHES NOMINAL IN
FASTENER LENGTH4.500 INCHES NOMINAL IN
THREAD LENGTH1.500 INCHES MINIMUM AND 2.375 INCHES MAXIMUM IN
HARDNESS RATING39.0 ROCKWELL C MINIMUM OVERALL
NOMINAL THREAD DIAMETER0.500 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
COLORBLACK OVERALL
SURFACE TREATMENTOXIDE OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 91253A730?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91253A730?
91253A730 is a SCREW,CAP,SOCKET HEAD.
What is the NSN for 91253A730?
91253A730 is cataloged in the U.S. Government catalog under NSN 5305-01-566-6400. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91253A730