PartsTable
Technical Data Sheet
Download PDF

91241A412 — SCREW,ASSEMBLED WASHER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

91241A412: SCREW,ASSEMBLED WASHER.

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING FASTENER, head_style: PAN, thread_length: 0.2500 INCHES NOMINAL IN, fastener_length: 0.2500 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, internal_drive_style: CROSS RECESS TYPE 1. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-610-7116, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
91241A412
NSN: 5305-01-610-7116
FSC: 5305 — Screws
CAGE: 0KVE6 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING FASTENER
head_stylePAN
thread_length0.2500 INCHES NOMINAL IN
fastener_length0.2500 INCHES NOMINAL IN
washer_quantity1
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
primary_washer_styleCOUNTERSINK INTERNAL TEETH
end_item_identification4120-01-592-7949
nominal_thread_diameter0.112 INCHES IN
thread_quantity_per_inch40.0
primary_washer_outside_diameter0.250 INCHES NOMINAL IN
NSN5305-01-610-7116
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 91241A412 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.2500 INCHES NOMINAL IN
•
PRIMARY WASHER OUTSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.2500 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: PAN
•
PRIMARY WASHER STYLE: COUNTERSINK INTERNAL TEETH
•
THREAD DIRECTION: RIGHT-HAND
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.2500 INCHES NOMINAL IN
PRIMARY WASHER OUTSIDE DIAMETER0.250 INCHES NOMINAL IN
THREAD LENGTH0.2500 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEPAN
PRIMARY WASHER STYLECOUNTERSINK INTERNAL TEETH
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
PART NAME ASSIGNED BY CONTROLLING AGENCYPAN HEAD PHILLIPS WITH SPRING-TENSION LOCK WASHER
END ITEM IDENTIFICATION4120-01-592-7949
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
10-52935-01Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 91241A412?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91241A412?
91241A412 is a SCREW,ASSEMBLED WASHER.
What parts can replace 91241A412?
There is 1 known substitute for 91241A412: 10-52935-01. Substitute compatibility should be verified for your specific system.
What is the NSN for 91241A412?
91241A412 is cataloged in the U.S. Government catalog under NSN 5305-01-610-7116. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91241A412