912-M10X30 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

912-M10X30: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT CHAMFER, head_height: 10.0 MILLIMETERS NOMINAL MM, head_diameter: 16.0 MILLIMETERS NOMINAL MM, thread_length: 25.5 MILLIMETERS NOMINAL MM, fastener_length: 30.00 MILLIMETERS NOMINAL MM. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-101-6026, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

912-M10X30

NSN: 5305-01-101-6026
FSC: 5305 — Screws
CAGE: 15526 — METRIC AND MULTISTANDARD COMPONENTS CORP (USA)

SPECIFICATIONS

material	STEEL OVERALL
head_style	FLAT CHAMFER
head_height	10.0 MILLIMETERS NOMINAL MM
head_diameter	16.0 MILLIMETERS NOMINAL MM
thread_length	25.5 MILLIMETERS NOMINAL MM
fastener_length	30.00 MILLIMETERS NOMINAL MM
hardness_rating	27.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
thread_direction	RIGHT-HAND
width_across_flats	8.0 MILLIMETERS NOMINAL MM
internal_drive_style	HEXAGON
nominal_thread_diameter	10.0 MILLIMETERS MM
minimum_tensile_strength	142230 POUNDS PER SQUARE INCH LBS
NSN	5305-01-101-6026

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 8.0 MILLIMETERS NOMINAL MM

•

HEAD HEIGHT: 10.0 MILLIMETERS NOMINAL MM

•

FASTENER LENGTH: 30.00 MILLIMETERS NOMINAL MM

•

THREAD PITCH IN MILLIMETERS: 1.5

•

THREAD LENGTH: 25.5 MILLIMETERS NOMINAL MM

•

HARDNESS RATING: 27.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL

•

MATERIAL DOCUMENT AND CLASSIFICATION: DIN 267,CL 10.9 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

NOMINAL THREAD DIAMETER: 10.0 MILLIMETERS MM

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	8.0 MILLIMETERS NOMINAL MM
HEAD HEIGHT	10.0 MILLIMETERS NOMINAL MM
FASTENER LENGTH	30.00 MILLIMETERS NOMINAL MM
THREAD PITCH IN MILLIMETERS	1.5
THREAD LENGTH	25.5 MILLIMETERS NOMINAL MM
HARDNESS RATING	27.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	DIN 267,CL 10.9 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER	10.0 MILLIMETERS MM
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND

SUBSTITUTES & CROSS-REFERENCES 4

82067Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

DIN912-M10X30-8.8Reference document

Same NSN cross-reference

Reference document — Secondary reference

M10X30DIN912-10.9Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

M10X30DIN912Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy 912-M10X30?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 912-M10X30?

912-M10X30 is a SCREW,CAP,SOCKET HEAD.

What parts can replace 912-M10X30?

There are 4 known substitutes for 912-M10X30: 82067, DIN912-M10X30-8.8, M10X30DIN912-10.9 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 912-M10X30?

912-M10X30 is cataloged in the U.S. Government catalog under NSN 5305-01-101-6026. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

912-M10X30 — SCREW,CAP,SOCKET HEAD

Request a Quote — 912-M10X30