PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 911TR
911TR ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The STUD,SHOULDERED AND STEPPED is a the manufacturer industrial component. Key specifications include material: STEEL, thread_class: 2A STUD THREAD A, thread_length: 1.375 INCHES NOMINAL STUD THREAD IN, overall_length: 5.531 INCHES NOMINAL IN, shoulder_length: 0.156 INCHES NOMINAL IN, style_designator: SHOULDERED AND STEPPED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5307-00-576-0464, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
911TR
NSN: 5307-00-576-0464
FSC: 5307
CAGE: 75Q65 — OSHKOSH DEFENSE LLC (USA)
SPECIFICATIONS
materialSTEEL
thread_class2A STUD THREAD A
thread_length1.375 INCHES NOMINAL STUD THREAD IN
overall_length5.531 INCHES NOMINAL IN
shoulder_length0.156 INCHES NOMINAL IN
style_designatorSHOULDERED AND STEPPED
thread_directionRIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
shoulder_diameter1.344 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
nominal_thread_size1.000 INCHES NUT THREAD IN
nut_end_shank_length0.625 INCHES NOMINAL IN
distance_across_flats1.020 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN
nut_end_shank_diameter1.012 INCHES NOMINAL IN
NSN5307-00-576-0464
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 911TR · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SHOULDERED AND STEPPED
•
MATERIAL: STEEL
•
DISTANCE ACROSS FLATS: 1.020 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN
•
SHOULDER DIAMETER: 1.344 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.375 INCHES NOMINAL STUD THREAD IN
•
THREAD SERIES DESIGNATOR: UN STUD THREAD
•
NUT END SHANK DIAMETER: 1.012 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSHOULDERED AND STEPPED
MATERIALSTEEL
DISTANCE ACROSS FLATS1.020 INCHES MINIMUM AND 1.040 INCHES MAXIMUM IN
SHOULDER DIAMETER1.344 INCHES MINIMUM AND 1.375 INCHES MAXIMUM IN
THREAD LENGTH1.375 INCHES NOMINAL STUD THREAD IN
THREAD SERIES DESIGNATORUN STUD THREAD
NUT END SHANK DIAMETER1.012 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNS NUT THREAD
SHOULDER LENGTH0.156 INCHES NOMINAL IN
NUT END SHANK LENGTH0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
9968Interchangeable
interchangeable cross-reference
interchangeable
5120-00-112-9372Interchangeable
interchangeable cross-reference
interchangeable
48321Interchangeable
interchangeable cross-reference
interchangeable
3000SJ 3/4 INInterchangeable
interchangeable cross-reference
interchangeable
FIG3000SJ-3/4 INInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 911TR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 911TR?
911TR is a STUD,SHOULDERED AND STEPPED.
What parts can replace 911TR?
There are 5 known substitutes for 911TR: 9968, 5120-00-112-9372, 48321 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 911TR?
911TR is cataloged in the Federal Logistics Information System (FLIS) under NSN 5307-00-576-0464. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 911TR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026