PartsTable
Technical Data Sheet
PartsTable / MRO / 9119-3
9119-3 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

MODIFICATION KIT,WATER TREATMENT. Key specifications include document_type: ENGINEERING DRAWING, document_source: 81337, special_features: OVERALL LENGTH: 25.18"; CANISTER HEIGHT: 1.7", special_markings: WARNING: DO NOT DRINK FROM FLUSH TUBE, end_item_identification: HOLSTER, component_document_origin: INDUSTRIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-018-1491, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 9119-3
NSN: 5305-00-018-1491
FSC: 5305
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
document_typeENGINEERING DRAWING
document_source81337
special_featuresOVERALL LENGTH: 25.18"; CANISTER HEIGHT: 1.7"
special_markingsWARNING: DO NOT DRINK FROM FLUSH TUBE
component_quantity5
end_item_identificationHOLSTER
component_document_originINDUSTRIAL
supply_items_and_quantitiesCANTEEN ADAPTER KIT, BITE VALVE ASSEMLBY (1); QUICK CONNECT FITTING, MALE (1); IWTD PURIFIER (1);QUICK CONNECT FITTING, FEMALE (1); CANTEEN ADAPTER KIT, DRINK HOSE (1)
part_name_assigned_by_controlling_agencyINDIVIDUAL WATER TREATMENT DEVICE FILTER KIT WITH ADAPTERS
NSN5305-00-018-1491
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 9119-3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NOMINAL THREAD DIAMETER: 0.625 INCHES IN
•
THREAD QUANTITY PER INCH: 18
•
WIDTH BETWEEN FLATS: 0.860 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
•
THREAD SERIES DESIGNATOR: UNF
•
FASTENER LENGTH: 3.719 INCHES MINIMUM AND 3.781 INCHES MAXIMUM IN
•
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH LBS
•
HEAD HEIGHT: 0.456 INCHES MINIMUM AND 0.481 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NOMINAL THREAD DIAMETER0.625 INCHES IN
THREAD QUANTITY PER INCH18
WIDTH BETWEEN FLATS0.860 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
THREAD SERIES DESIGNATORUNF
FASTENER LENGTH3.719 INCHES MINIMUM AND 3.781 INCHES MAXIMUM IN
MINIMUM YIELD STRENGTH85000 POUNDS PER SQUARE INCH LBS
HEAD HEIGHT0.456 INCHES MINIMUM AND 0.481 INCHES MAXIMUM IN
THREAD LENGTH1.500 INCHES MINIMUM AND 1.688 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
11377Interchangeable
interchangeable cross-reference
interchangeable
FF-N-836Interchangeable
interchangeable cross-reference
interchangeable
113850Interchangeable
interchangeable cross-reference
interchangeable
91193Interchangeable
interchangeable cross-reference
interchangeable
91193-00Interchangeable
interchangeable cross-reference
interchangeable
125A4260G1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9119-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9119-3?
9119-3 is a MODIFICATION KIT,WATER TREATMENT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 9119-3?
There are 15 known substitutes for 9119-3: 11377, FF-N-836, 113850 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9119-3?
9119-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-018-1491. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9119-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026