PartsTable
Technical Data Sheet
Download PDF

9117M15P03 — PIN,TAPERED,PLAIN

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9117M15P03: PIN,TAPERED,PLAIN.

The PIN,TAPERED,PLAIN is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: ALUMINUM ALLOY 2024 OVERALL, surface_finish: 63.0 MICROINCHES OVERALL, first_end_style: SQUARE W/THRU HOLE, special_features: THRU HOLE DIA 0.057 IN. NOM IN, first_end_location: BOTH ENDS, large_end_diameter: 0.1173 INCHES MINIMUM AND 0.1182 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-179-7985, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9117M15P03
NSN: 5315-01-179-7985
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 OVERALL
surface_finish63.0 MICROINCHES OVERALL
first_end_styleSQUARE W/THRU HOLE
special_featuresTHRU HOLE DIA 0.057 IN. NOM IN
first_end_locationBOTH ENDS
large_end_diameter0.1173 INCHES MINIMUM AND 0.1182 INCHES MAXIMUM IN
pin_overall_length0.073 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
criticality_code_justificationABPJ AND FEAT
material_document_and_classificationQQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
NSN5315-01-179-7985
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9117M15P03 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 63.0 MICROINCHES OVERALL
•
FIRST END LOCATION: BOTH ENDS
•
LARGE END DIAMETER: 0.1173 INCHES MINIMUM AND 0.1182 INCHES MAXIMUM IN
•
FIRST END STYLE: SQUARE W/THRU HOLE
•
CRITICALITY CODE JUSTIFICATION: ABPJ AND FEAT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL LENGTH: 0.073 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
SURFACE FINISH63.0 MICROINCHES OVERALL
FIRST END LOCATIONBOTH ENDS
LARGE END DIAMETER0.1173 INCHES MINIMUM AND 0.1182 INCHES MAXIMUM IN
FIRST END STYLESQUARE W/THRU HOLE
CRITICALITY CODE JUSTIFICATIONABPJ AND FEAT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL LENGTH0.073 INCHES MINIMUM AND 0.082 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SPECIAL FEATURESTHRU HOLE DIA 0.057 IN. NOM IN
MATERIALALUMINUM ALLOY 2024 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
JEPX0450080AAReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9117M15P03?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9117M15P03?
9117M15P03 is a PIN,TAPERED,PLAIN.
What parts can replace 9117M15P03?
There is 1 known substitute for 9117M15P03: JEPX0450080AA. Substitute compatibility should be verified for your specific system.
What is the NSN for 9117M15P03?
9117M15P03 is cataloged in the U.S. Government catalog under NSN 5315-01-179-7985. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9117M15P03

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.