PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9112PPFS118A
9112PPFS118A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEAL, bore_shape: STRAIGHT, bore_diameter: 60.00 MILLIMETERS NOMINAL MM, overall_width: 18.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-124-8804, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9112PPFS118A
NSN: 3110-00-124-8804
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEAL
bore_shapeSTRAIGHT
bore_diameter60.00 MILLIMETERS NOMINAL MM
overall_width18.0 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter95.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
NSN3110-00-124-8804
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 9112PPFS118A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
LOAD DIRECTION: RADIAL
•
SURFACE FINISH: GROUND
•
LUBRICATION MATERIAL: GREASE
•
MATERIAL: STEEL BALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
LOAD DIRECTIONRADIAL
SURFACE FINISHGROUND
LUBRICATION MATERIALGREASE
MATERIALSTEEL BALL
MATERIALSTEEL RETAINER
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
60834-1Interchangeable
interchangeable cross-reference
interchangeable
L1-6Interchangeable
interchangeable cross-reference
interchangeable
Z993L12Interchangeable
Same NIIN cross-reference
interchangeable
60834-001Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9112PPFS118A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9112PPFS118A?
9112PPFS118A is a BEARING,BALL,ANNULAR.
What parts can replace 9112PPFS118A?
There are 4 known substitutes for 9112PPFS118A: 60834-1, L1-6, Z993L12 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9112PPFS118A?
9112PPFS118A is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-124-8804. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9112PPFS118A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026