PartsTable
Technical Data Sheet
Download PDF

9112988 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

9112988: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include body_style: RECTANGULAR W/MOUNTING HOLES/SLOTS, body_width: 0.170 INCHES NOMINAL IN, body_height: 0.315 INCHES NOMINAL IN, body_length: 1.000 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.050 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-754-8744, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 9112988
NSN: 5905-00-754-8744
FSC: 5905 — Resistor
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
body_styleRECTANGULAR W/MOUNTING HOLES/SLOTS
body_width0.170 INCHES NOMINAL IN
body_height0.315 INCHES NOMINAL IN
body_length1.000 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.050 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
overall_width0.170 INCHES NOMINAL IN
overall_height0.315 INCHES NOMINAL IN
overall_length1.050 INCHES NOMINAL IN
shaft_diameter0.125 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
NSN5905-00-754-8744
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,WIRE WOUND,NON TITLE COMPONENT PN 9112988 MFR RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
ELECTRICAL RESISTANCE PER SECTION: 1.000 KILOHMS SINGLE SECTION
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 175.0 SINGLE SECTION
•
SECTION QUANTITY: 1
•
MOUNTING FACILITY QUANTITY: 2
•
SHAFT DIAMETER: 0.125 INCHES NOMINAL IN
•
BODY STYLE: RECTANGULAR W/MOUNTING HOLES/SLOTS
•
TERMINAL LENGTH: 6.000 INCHES MINIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.315 INCHES NOMINAL IN
ELECTRICAL RESISTANCE PER SECTION1.000 KILOHMS SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER175.0 SINGLE SECTION
SECTION QUANTITY1
MOUNTING FACILITY QUANTITY2
SHAFT DIAMETER0.125 INCHES NOMINAL IN
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
TERMINAL LENGTH6.000 INCHES MINIMUM IN
MOUNTING METHODUNTHREADED HOLE(S)
BODY WIDTH0.170 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 6
220W1-102Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
240-1297P4Reference document
Same NSN cross-reference
Reference document — Secondary reference
1485534-1REVAReference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
692-102JReference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
220L821-102Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
1819935-008Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9112988?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9112988?
9112988 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 9112988?
There are 6 known substitutes for 9112988: 220W1-102, 240-1297P4, 1485534-1REVA and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9112988?
9112988 is cataloged in the U.S. Government catalog under NSN 5905-00-754-8744. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9112988