PartsTable
Technical Data Sheet
Download PDF

91115A366 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

91115A366: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN, material: STEEL OVERALL, thread_length: 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN, style_designator: INTERNALLY THREADED FULL LENGTH, thread_direction: RIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD), width_across_flats: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-613-4213, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
91115A366
NSN: 5340-01-613-4213
FSC: 5340 — Hardware, Commercial
CAGE: 3A054 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
length0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
materialSTEEL OVERALL
thread_length0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
style_designatorINTERNALLY THREADED FULL LENGTH
thread_directionRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
width_across_flats0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
nominal_thread_size0.138 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
cross-sectional_shapeHEXAGON
end_item_identificationAN/FPN-63
thread_quantity_per_inch32 LEFT INTERNAL (INCLUDES THRU THREAD)
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) LEFT INTERNAL (INCLUDES THRU THREAD)
NSN5340-01-613-4213
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 91115A366 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
LENGTH: 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
•
STYLE DESIGNATOR: INTERNALLY THREADED FULL LENGTH
•
THREAD DIRECTION: RIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
•
NOMINAL THREAD SIZE: 0.138 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
•
CROSS-SECTIONAL SHAPE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
LENGTH0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
THREAD LENGTH0.432 INCHES MINIMUM AND 0.442 INCHES MAXIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
STYLE DESIGNATORINTERNALLY THREADED FULL LENGTH
THREAD DIRECTIONRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
NOMINAL THREAD SIZE0.138 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) IN
CROSS-SECTIONAL SHAPEHEXAGON
END ITEM IDENTIFICATIONAN/FPN-63
THREAD QUANTITY PER INCH32 LEFT INTERNAL (INCLUDES THRU THREAD)
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 91115A366?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91115A366?
91115A366 is a STANDOFF,THREADED,SPACING.
What is the NSN for 91115A366?
91115A366 is cataloged in the U.S. Government catalog under NSN 5340-01-613-4213. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91115A366

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.