PartsTable
Technical Data Sheet
Download PDF

91102A770 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

91102A770: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.502 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN, hardness_rating: 38.0 ROCKWELL C NOMINAL, outside_diameter: 0.869 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: ZINC OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-533-5500, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
91102A770
NSN: 5310-01-533-5500
FSC: 5310 — Nuts and Washers
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.502 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
hardness_rating38.0 ROCKWELL C NOMINAL
outside_diameter0.869 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentZINC OVERALL
material_thickness0.120 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
end_item_identificationASSAULT HOSELINE SYSTEM
NSN5310-01-533-5500
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 91102A770 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 38.0 ROCKWELL C NOMINAL
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 0.869 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.120 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.502 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HARDNESS RATING38.0 ROCKWELL C NOMINAL
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER0.869 INCHES MAXIMUM IN
MATERIAL THICKNESS0.120 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
SURFACE TREATMENTZINC OVERALL
END ITEM IDENTIFICATIONASSAULT HOSELINE SYSTEM
MATERIALSTEEL OVERALL
HOLE DIAMETER0.502 INCHES MINIMUM AND 0.512 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 91102A770?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91102A770?
91102A770 is a WASHER,LOCK.
What is the NSN for 91102A770?
91102A770 is cataloged in the U.S. Government catalog under NSN 5310-01-533-5500. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91102A770

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.