911.591 — RIVET,TUBULAR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

911.591: RIVET,TUBULAR.

The RIVET,TUBULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_height: 6.6 MILLIMETERS MINIMUM MM, washer_thickness: 2.3 MILLIMETERS NOMINAL MM, width_across_flats: 12.7 MILLIMETERS MINIMUM AND 13.0 MILLIMETERS MAXIMUM MM, end_item_identification: HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS), washer_outside_diameter: 16.5 MILLIMETERS MINIMUM MM. This part is cataloged in the U.S.

Government catalog under NSN 5320-00-254-4131, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

911.591

NSN: 5320-00-254-4131
NIINs: 002544131, 013760773
FSC: 5320 — Rivets
CAGE: 7U3G0 — PARMAC, LLC DIV PARMAC INC (USA)

SPECIFICATIONS

material	STEEL OVERALL
overall_height	6.6 MILLIMETERS MINIMUM MM
washer_thickness	2.3 MILLIMETERS NOMINAL MM
width_across_flats	12.7 MILLIMETERS MINIMUM AND 13.0 MILLIMETERS MAXIMUM MM
end_item_identification	HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
washer_outside_diameter	16.5 MILLIMETERS MINIMUM MM
NSN	5320-00-254-4131

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.244 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN

•

HOLE DEPTH: 0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL

•

HEAD STYLE: COUNTERSUNK W/ REVERSE CHAMFER

•

NONDEFINITIVE SPEC/STD DATA: 13 TYPE AND F GRADE

•

SHANK STYLE: TUBULAR

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.244 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
HEAD HEIGHT	0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
FASTENER LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
HOLE DEPTH	0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HEAD STYLE	COUNTERSUNK W/ REVERSE CHAMFER
NONDEFINITIVE SPEC/STD DATA	13 TYPE AND F GRADE
SHANK STYLE	TUBULAR
COUNTERSINK ANGLE	148.0 DEGREES MINIMUM AND 150.0 DEGREES MAXIMUM
SHEAR STRENGTH	36000 DOUBLE POUNDS PER SQUARE INCH

SUBSTITUTES & CROSS-REFERENCES 9

5320PL1215170Reference document

Same NSN cross-reference

Reference document — Informative reference only

911115PC107Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2509V032Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MS16536-242Reference document

Same NSN cross-reference

Reference document — Secondary reference

911102PC107Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

60275X0.500Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 911.591?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 911.591?

911.591 is a RIVET,TUBULAR.

What parts can replace 911.591?

There are 9 known substitutes for 911.591: 5320PL1215170, 911115PC107, 2509V032 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 911.591?

911.591 is cataloged in the U.S. Government catalog under NSN 5320-00-254-4131. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

911.591 — RIVET,TUBULAR

Request a Quote — 911.591