PartsTable
Technical Data Sheet
911-170 ITEM 74 ✓ Verified by PartsTable
· BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The BEARING is a the manufacturer industrial component. Key specifications include body_length: 0.260 INCHES MAXIMUM IN, overall_width: 5.500 INCHES NOMINAL IN, rating_method: ELECTRICAL SINGLE COMPONENT SINGLE WINDING, coil_form_type: SOLID SINGLE COMPONENT, inclosure_type: FULLY INCLOSED, overall_height: 0.750 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-01-085-3060, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
911-170 ITEM 74
NSN: 3120-01-085-3060
FSC: 3120
CAGE: 14818 — DONALDSON COMPANY, INC. (USA)
SPECIFICATIONS
body_length0.260 INCHES MAXIMUM IN
overall_width5.500 INCHES NOMINAL IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
coil_form_typeSOLID SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
overall_height0.750 INCHES MAXIMUM IN
overall_length5.485 INCHES MINIMUM AND 5.515 INCHES MAXIMUM IN
quality_factor25 MINIMUM SINGLE COMPONENT SINGLE WINDING
mounting_methodTERMINAL SINGLE GROUP
special_featuresCAPACITOR 21,COIL 2,CONNECTOR 1,DIODE 10,MICROCIRCUIT 1,PRINTED WIRING BOARD 1,RESISTOR 56,SWITCH TOGGLE 1,TRANSISTOR 17
inductance_rating1.90 MICROHENRIES NOMINAL SINGLE COMPONENT SINGLE WINDING
body_outside_diameter0.105 INCHES MAXIMUM IN
NSN3120-01-085-3060
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 911-170 ITEM 74 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
101-910Interchangeable
interchangeable cross-reference
interchangeable
1910-1Interchangeable
interchangeable cross-reference
interchangeable
1604721-1Interchangeable
interchangeable cross-reference
interchangeable
E7-HA06-06NJX06NIInterchangeable
interchangeable cross-reference
interchangeable
3206-6FHX6FH48Interchangeable
interchangeable cross-reference
interchangeable
561-361-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 911-170 ITEM 74?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 911-170 ITEM 74?
911-170 ITEM 74 is a BEARING.
What parts can replace 911-170 ITEM 74?
There are 14 known substitutes for 911-170 ITEM 74: 101-910, 1910-1, 1604721-1 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 911-170 ITEM 74?
911-170 ITEM 74 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-01-085-3060. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 911-170 ITEM 74