PartsTable
Technical Data Sheet
Download PDF

91099A205 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

91099A205: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK UNDERCUT, head_height: 0.059 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.262 INCHES NOMINAL IN, thread_length: 0.191 INCHES NOMINAL IN, screw_material: STEEL COMP 302. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-610-5510, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
91099A205
NSN: 5305-01-610-5510
FSC: 5305 — Screws
CAGE: 0KVE6 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK UNDERCUT
head_height0.059 INCHES NOMINAL IN
thread_class2A A
head_diameter0.262 INCHES NOMINAL IN
thread_length0.191 INCHES NOMINAL IN
screw_materialSTEEL COMP 302
fastener_length0.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE II
end_item_identification4120-01-592-7949
nominal_thread_diameter0.138 INCHES IN
NSN5305-01-610-5510
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 91099A205 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.059 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.191 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK UNDERCUT
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 302
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE II
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.059 INCHES NOMINAL IN
FASTENER LENGTH0.250 INCHES NOMINAL IN
THREAD LENGTH0.191 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT COUNTERSUNK UNDERCUT
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 302
INTERNAL DRIVE STYLECROSS RECESS TYPE II
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
PART NAME ASSIGNED BY CONTROLLING AGENCYFLAT HEAD PHILLIPS MACHINE SCREW
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
10-52925-02Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 91099A205?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91099A205?
91099A205 is a SCREW,MACHINE.
What parts can replace 91099A205?
There is 1 known substitute for 91099A205: 10-52925-02. Substitute compatibility should be verified for your specific system.
What is the NSN for 91099A205?
91099A205 is cataloged in the U.S. Government catalog under NSN 5305-01-610-5510. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91099A205