PartsTable
Technical Data Sheet
PartsTable / O-RING / 91082
91082 ✓ Verified by PartsTable
Bestway · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL ASSY,MAGNETIC SHAFT is a Bestway industrial component. Key specifications include special_test_features: SEAL FACES LAPPED FLAT WITHIN TWO HELIUM LIGHT BANDS, end_item_identification: KC-135R AIRCRAFT HYDRAULIC MOTOR,NHA 1650-00-535-5878. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-482-4333, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
91082
NSN: 5331-00-482-4333
FSC: 5331 — O-RING
CAGE: 63722 — AFP IMAGING CORP (USA)
SPECIFICATIONS
special_test_featuresSEAL FACES LAPPED FLAT WITHIN TWO HELIUM LIGHT BANDS
end_item_identificationKC-135R AIRCRAFT HYDRAULIC MOTOR,NHA 1650-00-535-5878
NSN5331-00-482-4333
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 91082 MFR: Bestway ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
•
OUTSIDE DIAMETER: 1.424 INCHES MINIMUM AND 1.458 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
OUTSIDE DIAMETER1.424 INCHES MINIMUM AND 1.458 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
HF15-5-770HMP0RM1PCTInterchangeable
interchangeable cross-reference
interchangeable
115-001Interchangeable
interchangeable cross-reference
interchangeable
216-01682-1Interchangeable
interchangeable cross-reference
interchangeable
115990Interchangeable
interchangeable cross-reference
interchangeable
CT903Interchangeable
interchangeable cross-reference
interchangeable
5H177Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 91082?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91082?
91082 is a SEAL ASSY,MAGNETIC SHAFT manufactured by Bestway.
What parts can replace 91082?
There are 20 known substitutes for 91082: HF15-5-770HMP0RM1PCT, 115-001, 216-01682-1 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 91082?
91082 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-482-4333. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91082

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026