PartsTable
Technical Data Sheet
PartsTable / MRO / 9108186
9108186 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FUSE,CARTRIDGE is a the manufacturer industrial component. Key specifications include material: GLASS CASE, body_style: TUBE TYPE, body_width: 1.125 INCHES NOMINAL IN, body_height: 0.750 INCHES NOMINAL IN, body_length: 2.531 INCHES NOMINAL IN, inclosure_type: FULLY INCLOSED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-057-8782, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 9108186
NSN: 5331-00-057-8782
FSC: 5331 — O-RING
CAGE: 25184 — PARKER HANNIFIN CORPORATION DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialGLASS CASE
body_styleTUBE TYPE
body_width1.125 INCHES NOMINAL IN
body_height0.750 INCHES NOMINAL IN
body_length2.531 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
overall_length1.248 INCHES MINIMUM AND 1.257 INCHES MAXIMUM IN
actuator_length0.781 INCHES NOMINAL IN
overall_diameter0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
features_providedNONRENEWABLE FUSIBLE ELEMENT
surface_treatmentNICKEL TERMINAL
nominal_thread_size0.375 INCHES IN
NSN5331-00-057-8782
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9108186 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.750 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
5995Interchangeable
interchangeable cross-reference
interchangeable
N17594Interchangeable
interchangeable cross-reference
interchangeable
9108186Interchangeable
interchangeable cross-reference
interchangeable
312-200Interchangeable
interchangeable cross-reference
interchangeable
4439112Interchangeable
interchangeable cross-reference
interchangeable
287-1161P7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9108186?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9108186?
9108186 is a FUSE,CARTRIDGE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 9108186?
There are 6 known substitutes for 9108186: 5995, N17594, 9108186 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9108186?
9108186 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-057-8782. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9108186

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026