PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9107PGFS50160
9107PGFS50160 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 35.00 MILLIMETERS NOMINAL MM, overall_width: 14.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-727-9202, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9107PGFS50160
NSN: 3110-00-727-9202
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter35.00 MILLIMETERS NOMINAL MM
overall_width14.0 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
special_featuresINTERNAL CLEARANCE MEASURED UNDER A 15 LB. LOAD LBS
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
features_providedMOUNTING GROOVE
internal_clearance0.0045 INCHES MINIMUM RADIAL AND 0.0060 INCHES MAXIMUM RADIAL IN
NSN3110-00-727-9202
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 9107PGFS50160 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL QUANTITY: 1
•
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL MM
•
MATERIAL: RUBBER SYNTHETIC SEAL
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY INTERNAL FIT-UP D ESIGNATION
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH14.0 MILLIMETERS NOMINAL MM
SEAL QUANTITY1
OVERALL OUTSIDE DIAMETER62.00 MILLIMETERS NOMINAL MM
SPECIAL FEATURESINTERNAL CLEARANCE MEASURED UNDER A 15 LB. LOAD LBS
MATERIALRUBBER SYNTHETIC SEAL
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY INTERNAL FIT-UP D ESIGNATION
MATERIALSTEEL INNER RING
MATERIALSTEEL BALL
MATERIALSTEEL RETAINER
MATERIALSTEEL OUTER RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
6205RSInterchangeable
interchangeable cross-reference
interchangeable
12Z369-111Interchangeable
interchangeable cross-reference
interchangeable
9505Interchangeable
interchangeable cross-reference
interchangeable
93L05X1Interchangeable
interchangeable cross-reference
interchangeable
93L05Interchangeable
interchangeable cross-reference
interchangeable
12Z369-118Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9107PGFS50160?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9107PGFS50160?
9107PGFS50160 is a BEARING,BALL,ANNULAR.
What parts can replace 9107PGFS50160?
There are 14 known substitutes for 9107PGFS50160: 6205RS, 12Z369-111, 9505 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9107PGFS50160?
9107PGFS50160 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-727-9202. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9107PGFS50160

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026