PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9105495
9105495 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 5.500 INCHES NOMINAL IN, overall_length: 5.500 INCHES NOMINAL IN, aperture_diameter: 4.250 INCHES NOMINAL IN, outside_corner_radius: 0.625 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-765-4638, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9105495
NSN: 5330-00-765-4638
FSC: 5330
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
hole_diameter0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width5.500 INCHES NOMINAL IN
overall_length5.500 INCHES NOMINAL IN
aperture_diameter4.250 INCHES NOMINAL IN
outside_corner_radius0.625 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_width0.625 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.625 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width4.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length4.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-765-4638
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9105495 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.625 INCHES NOMINAL IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.625 INCHES NOMINAL IN
•
APERTURE DIAMETER: 4.250 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 4.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 4.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
HOLE DIAMETER: 0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.625 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.625 INCHES NOMINAL IN
APERTURE DIAMETER4.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH4.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH5.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH4.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
HOLE DIAMETER0.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.625 INCHES NOMINAL IN
OVERALL WIDTH5.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
123078Interchangeable
interchangeable cross-reference
interchangeable
10082594Interchangeable
interchangeable cross-reference
interchangeable
25088493Interchangeable
interchangeable cross-reference
interchangeable
A20486Interchangeable
interchangeable cross-reference
interchangeable
703094Interchangeable
interchangeable cross-reference
interchangeable
9123078Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9105495?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9105495?
9105495 is a GASKET.
What parts can replace 9105495?
There are 6 known substitutes for 9105495: 123078, 10082594, 25088493 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9105495?
9105495 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-765-4638. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9105495

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026