PartsTable
Technical Data Sheet
Download PDF

9102J — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9102J: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, hole_depth: 0.250 INCHES NOMINAL IN, hole_diameter: 0.156 INCHES NOMINAL IN, overall_height: 0.500 INCHES NOMINAL IN, style_designator: FLAT TOP COUNTERBORED, first_counterbore_depth: 0.188 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-753-3485, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9102J
NSN: 5340-00-753-3485
FSC: 5340 — Hardware, Commercial
CAGE: 77969 — RUBBERCRAFT CORPORATION OF CALIFORNIA, LTD. DBA RUBBERCRAFT CORP (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
hole_depth0.250 INCHES NOMINAL IN
hole_diameter0.156 INCHES NOMINAL IN
overall_height0.500 INCHES NOMINAL IN
style_designatorFLAT TOP COUNTERBORED
first_counterbore_depth0.188 INCHES NOMINAL IN
material_hardness_rating80.0 DUROMETER NOMINAL
second_counterbore_depth0.062 INCHES NOMINAL IN
first_counterbore_diameter0.313 INCHES NOMINAL IN
outside/top_flange_diameter0.625 INCHES NOMINAL IN
NSN5340-00-753-3485
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9102J MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND COUNTERBORE DEPTH: 0.062 INCHES NOMINAL IN
•
OUTSIDE/TOP FLANGE DIAMETER: 0.625 INCHES NOMINAL IN
•
MATERIAL HARDNESS RATING: 80.0 DUROMETER NOMINAL
•
HOLE DEPTH: 0.250 INCHES NOMINAL IN
•
FIRST COUNTERBORE DIAMETER: 0.313 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT TOP COUNTERBORED
•
FIRST COUNTERBORE DEPTH: 0.188 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND COUNTERBORE DEPTH0.062 INCHES NOMINAL IN
OVERALL HEIGHT0.500 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.625 INCHES NOMINAL IN
MATERIAL HARDNESS RATING80.0 DUROMETER NOMINAL
HOLE DEPTH0.250 INCHES NOMINAL IN
FIRST COUNTERBORE DIAMETER0.313 INCHES NOMINAL IN
STYLE DESIGNATORFLAT TOP COUNTERBORED
FIRST COUNTERBORE DEPTH0.188 INCHES NOMINAL IN
COLORBLACK
MATERIALRUBBER SYNTHETIC
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9102J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9102J?
9102J is a BUMPER.
What is the NSN for 9102J?
9102J is cataloged in the U.S. Government catalog under NSN 5340-00-753-3485. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9102J

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.