PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9101191
9101191 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.625 INCHES NOMINAL IN, length: 0.300 INCHES NOMINAL IN, material: STEEL COMP 304 OVERALL, hole_diameter: 0.093 INCHES NOMINAL IN, overall_height: 0.360 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-1656, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9101191
NSN: 5330-00-291-1656
FSC: 5330
CAGE: 30379 — EUCLID INC (USA)
SPECIFICATIONS
width0.625 INCHES NOMINAL IN
length0.300 INCHES NOMINAL IN
materialSTEEL COMP 304 OVERALL
hole_diameter0.093 INCHES NOMINAL IN
overall_height0.360 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.012 INCHES NOMINAL IN
loop/holding_dimension0.280 INCHES NOMINAL IN
distance_from_loop_center_to_end0.210 INCHES NOMINAL IN
material_document_and_classificationQQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-291-1656
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9101191 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL: LEATHER SEALING ELEMENT A
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 3.500 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
SEAL WIDTH: 0.468 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER0.500 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT A
CASE STYLESQUARE
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER3.500 INCHES NOMINAL IN
MATERIALLEATHER SEALING ELEMENT B
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
SEAL WIDTH0.468 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR-OPPOSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
3312Interchangeable
interchangeable cross-reference
interchangeable
3312AInterchangeable
interchangeable cross-reference
interchangeable
70050Interchangeable
interchangeable cross-reference
interchangeable
NAVYX2000PC40Interchangeable
interchangeable cross-reference
interchangeable
NAVYX1801PC41Interchangeable
interchangeable cross-reference
interchangeable
DH37K-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9101191?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9101191?
9101191 is a CLIP,SPRING TENSION.
What parts can replace 9101191?
There are 23 known substitutes for 9101191: 3312, 3312A, 70050 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9101191?
9101191 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-1656. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9101191

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026