PartsTable
Technical Data Sheet
910004 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONNECTOR,PLUG,ELECTRICAL is a the manufacturer industrial component. Key specifications include color: BLACK, radius: 1.125 INCHES NOMINAL IN, material: STEEL, outside_diameter: 1.000 INCHES NOMINAL IN, special_features: REPAIR PART FOR MICROSCOPE,SURGICAL,OPHTHALMIC,MDL OMS12,TROUTMAN SERIES, style_designator: CONCAVE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-559-7543, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
910004
NSN: 5340-00-559-7543
FSC: 5340
CAGE: 6N299 — AGCO CORP PARTS OPN (USA)
SPECIFICATIONS
colorBLACK
radius1.125 INCHES NOMINAL IN
materialSTEEL
outside_diameter1.000 INCHES NOMINAL IN
special_featuresREPAIR PART FOR MICROSCOPE,SURGICAL,OPHTHALMIC,MDL OMS12,TROUTMAN SERIES
style_designatorCONCAVE
material_thickness0.083 INCHES NOMINAL IN
operating_pressure10000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
end_connection_designSTRAIGHT ALL ENDS
end_item_identification4910-01-593-8607
cross-sectional_shape_styleROUND
engine_design_control_activity89749
NSN5340-00-559-7543
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 910004 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL THICKNESS: 0.083 INCHES NOMINAL IN
STYLE DESIGNATOR: CONCAVE
OUTSIDE DIAMETER: 1.000 INCHES NOMINAL IN
RADIUS: 1.125 INCHES NOMINAL IN
MATERIAL: STEEL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE 1008 TO SAE 1022 ASSN STD SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.083 INCHES NOMINAL IN
STYLE DESIGNATORCONCAVE
OUTSIDE DIAMETER1.000 INCHES NOMINAL IN
RADIUS1.125 INCHES NOMINAL IN
MATERIALSTEEL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE 1008 TO SAE 1022 ASSN STD SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
758-0328Upgraded Successor
successor cross-reference
successor
172545Upgraded Successor
successor cross-reference
successor
1948694Interchangeable
interchangeable cross-reference
interchangeable
0910333-4Interchangeable
interchangeable cross-reference
interchangeable
910333Interchangeable
interchangeable cross-reference
interchangeable
0910007-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 910004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 910004?
910004 is a CONNECTOR,PLUG,ELECTRICAL.
What parts can replace 910004?
There are 30 known substitutes for 910004: 758-0328, 172545, 1948694 and 27 more. Substitute compatibility should be verified for your specific system.
Is 910004 still available?
910004 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 910004