PartsTable
Technical Data Sheet
PartsTable / MRO / 91-98-0
91-98-0 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include material: STEEL COMP 303 OVERALL, body_style: RECTANGULAR, body_width: 0.350 INCHES NOMINAL IN, body_height: 0.375 INCHES NOMINAL IN, body_length: 0.150 INCHES NOMINAL IN, actuator_type: FLUSH DRIVE WITH SLOT-HOLE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-606-9822, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 91-98-0
NSN: 5330-00-606-9822
FSC: 5330
CAGE: 59618 — ALLIANCE LAUNDRY SYSTEMS LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
body_styleRECTANGULAR
body_width0.350 INCHES NOMINAL IN
body_height0.375 INCHES NOMINAL IN
body_length0.150 INCHES NOMINAL IN
actuator_typeFLUSH DRIVE WITH SLOT-HOLE
cubic_measure0.020 CUBIC INCHES
overall_width0.350 INCHES NOMINAL IN
overall_height0.337 INCHES NOMINAL IN
overall_length0.375 INCHES NOMINAL IN
mounting_methodTERMINAL
terminal_length0.187 INCHES MINIMUM IN
NSN5330-00-606-9822
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 91-98-0 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 303 OVERALL
•
CROSS-SECTIONAL HEIGHT: 1.000 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 1.873 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.378 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 303 OVERALL
CROSS-SECTIONAL HEIGHT1.000 INCHES NOMINAL IN
PERIPHERAL DIAMETER1.873 INCHES MINIMUM AND 1.875 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.378 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
8004-1Interchangeable
interchangeable cross-reference
interchangeable
5KH35KG111XInterchangeable
interchangeable cross-reference
interchangeable
316P566Interchangeable
interchangeable cross-reference
interchangeable
8004-1G1Interchangeable
interchangeable cross-reference
interchangeable
428-4-05214-000Interchangeable
interchangeable cross-reference
interchangeable
31-8004Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 91-98-0?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 91-98-0?
91-98-0 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 91-98-0?
There are 23 known substitutes for 91-98-0: 8004-1, 5KH35KG111X, 316P566 and 20 more. Substitute compatibility should be verified for your specific system.
Is 91-98-0 still available?
91-98-0 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 91-98-0

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026