PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9097-103
9097-103 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, thread_class: 2A A, thread_length: 0.312 INCHES NOMINAL IN, fastener_length: 0.312 INCHES MAXIMUM IN, thread_direction: RIGHT-HAND, internal_drive_style: CROSS RECESS TYPE II. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-203-1650, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9097-103
NSN: 5305-01-203-1650
FSC: 5305
CAGE: 31361 — WOODWARD, INC. (USA)
SPECIFICATIONS
head_styleFILLISTER
thread_class2A A
thread_length0.312 INCHES NOMINAL IN
fastener_length0.312 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE II
nominal_thread_diameter0.112 INCHES IN
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-203-1650
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 9097-103 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD CLASS: 2A A
•
THREAD LENGTH: 0.312 INCHES NOMINAL IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE II
•
THREAD QUANTITY PER INCH: 40
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FILLISTER
•
FASTENER LENGTH: 0.312 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD CLASS2A A
THREAD LENGTH0.312 INCHES NOMINAL IN
INTERNAL DRIVE STYLECROSS RECESS TYPE II
THREAD QUANTITY PER INCH40
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFILLISTER
FASTENER LENGTH0.312 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
1450-30Interchangeable
interchangeable cross-reference
interchangeable
030133Interchangeable
interchangeable cross-reference
interchangeable
30131Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9097-103?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9097-103?
9097-103 is a SCREW,MACHINE.
What parts can replace 9097-103?
There are 3 known substitutes for 9097-103: 1450-30, 030133, 30131. Substitute compatibility should be verified for your specific system.
What is the NSN for 9097-103?
9097-103 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-203-1650. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9097-103

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026