PartsTable
Technical Data Sheet

9096922-23 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RETAINER,HELICAL COMPRESSION SPR. Key specifications include material: STEEL COMP 1020, lip_thickness: 0.047 INCHES NOMINAL IN, overall_height: 0.062 INCHES NOMINAL IN, end_hole_diameter: 0.422 INCHES NOMINAL IN, body_inside_diameter: 0.625 INCHES NOMINAL IN, fsc_application_data: PUMP,AXIAL PISTONS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5340-00-167-4878, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9096922-23
NSN: 5340-00-167-4878
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 1020
lip_thickness0.047 INCHES NOMINAL IN
overall_height0.062 INCHES NOMINAL IN
end_hole_diameter0.422 INCHES NOMINAL IN
body_inside_diameter0.625 INCHES NOMINAL IN
fsc_application_dataPUMP,AXIAL PISTONS
body_outside_diameter0.743 INCHES MINIMUM AND 0.747 INCHES MAXIMUM IN
material_document_and_classificationAISI 1020 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-167-4878
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9096922-23 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI 1020 ASSN STD SINGLE MATERIAL RESPONSE
•
MATERIAL: STEEL COMP 1020
•
FSC APPLICATION DATA: PUMP,AXIAL PISTONS
•
BODY OUTSIDE DIAMETER: 0.743 INCHES MINIMUM AND 0.747 INCHES MAXIMUM IN
•
END HOLE DIAMETER: 0.422 INCHES NOMINAL IN
•
LIP THICKNESS: 0.047 INCHES NOMINAL IN
•
BODY INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI 1020 ASSN STD SINGLE MATERIAL RESPONSE
MATERIALSTEEL COMP 1020
FSC APPLICATION DATAPUMP,AXIAL PISTONS
BODY OUTSIDE DIAMETER0.743 INCHES MINIMUM AND 0.747 INCHES MAXIMUM IN
END HOLE DIAMETER0.422 INCHES NOMINAL IN
LIP THICKNESS0.047 INCHES NOMINAL IN
BODY INSIDE DIAMETER0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
K1138InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
59569InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5080-317InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
07-0101-0377InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9096922-23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9096922-23?
9096922-23 is a RETAINER,HELICAL COMPRESSION SPR.
What parts can replace 9096922-23?
There are 4 known substitutes for 9096922-23: K1138, 59569, 5080-317 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9096922-23?
9096922-23 is cataloged in the Federal Logistics Information System under NSN 5340-00-167-4878. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9096922-23