PartsTable
Technical Data Sheet
Download PDF

9096922-12 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

9096922-12: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.257 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, thread_length: 0.198 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.281 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-286-1086, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9096922-12
NSN: 5305-00-286-1086
FSC: 5305 — Screws
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.257 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
thread_length0.198 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.281 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentCADMIUM OR ZINC
thread_quantity_per_inch32
NSN5305-00-286-1086
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 9096922-12 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
•
FASTENER LENGTH: 0.281 INCHES NOMINAL IN
•
THREAD LENGTH: 0.198 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM OR ZINC
FASTENER LENGTH0.281 INCHES NOMINAL IN
THREAD LENGTH0.198 INCHES MINIMUM AND 0.212 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
59557Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9096922-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9096922-12?
9096922-12 is a SCREW,MACHINE.
What parts can replace 9096922-12?
There is 1 known substitute for 9096922-12: 59557. Substitute compatibility should be verified for your specific system.
What is the NSN for 9096922-12?
9096922-12 is cataloged in the U.S. Government catalog under NSN 5305-00-286-1086. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9096922-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.