PartsTable
Technical Data Sheet
Download PDF

909024 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

909024: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.568 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, thread_length: 0.559 INCHES MINIMUM IN, screw_material: STEEL, fastener_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-011-4663, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
909024
NSN: 5305-00-011-4663
FSC: 5305 — Screws
CAGE: 92392 — ALLIS-CHALMERS CORP (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.568 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
thread_length0.559 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.750 INCHES NOMINAL IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.312 INCHES IN
minimum_tensile_strength60000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch18
NSN5305-00-011-4663
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 909024 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.559 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.750 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.559 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 2S STYLE
SCREW MATERIALSTEEL
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLESLOT
SUBSTITUTES & CROSS-REFERENCES 4
FFS92Reference document
Same NSN cross-reference
Reference document — Identification reference
114663Reference document
Same NSN cross-reference
Reference document — Secondary reference
XC17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
0909024Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 909024?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 909024?
909024 is a SCREW,MACHINE.
What parts can replace 909024?
There are 4 known substitutes for 909024: FFS92, 114663, XC17 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 909024?
909024 is cataloged in the U.S. Government catalog under NSN 5305-00-011-4663. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 909024

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.