PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 909001
909001 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 0.7498 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM IN, contact_angle: 25.0 DEGREES MINIMUM, overall_width: 0.6980 INCHES MINIMUM AND 0.7180 INCHES MAXIMUM IN, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-1893, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
909001
NSN: 3110-00-157-1893
FSC: 3110
CAGE: 38443 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter0.7498 INCHES MINIMUM AND 0.7503 INCHES MAXIMUM IN
contact_angle25.0 DEGREES MINIMUM
overall_width0.6980 INCHES MINIMUM AND 0.7180 INCHES MAXIMUM IN
load_directionANGULAR
surface_finishGROUND
inner_ring_width0.5950 INCHES NOMINAL IN
outer_ring_width0.6080 INCHES NOMINAL IN
special_featuresOUTER AND INNER RINGS COUNTERBORED
style_designatorFRONT WHEEL, RADIAL AND THRUST, SEPARABLE
overall_outside_diameter2.0795 INCHES MINIMUM AND 2.0805 INCHES MAXIMUM IN
NSN3110-00-157-1893
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 909001 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: FRONT WHEEL, RADIAL AND THRUST, SEPARABLE
•
MATERIAL: STEEL INNER RING
•
LOAD DIRECTION: ANGULAR
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
STYLE DESIGNATORFRONT WHEEL, RADIAL AND THRUST, SEPARABLE
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
MATERIALSTEEL BALL
LOAD DIRECTIONANGULAR
SPECIAL FEATURESOUTER AND INNER RINGS COUNTERBORED
INTERNAL FIT-UP DESIGNATIONSTANDARD
CONTACT ANGLE25.0 DEGREES MINIMUM
INNER RING WIDTH0.5950 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
A1115Interchangeable
interchangeable cross-reference
interchangeable
700220Interchangeable
interchangeable cross-reference
interchangeable
702006Interchangeable
interchangeable cross-reference
interchangeable
26916-000Interchangeable
interchangeable cross-reference
interchangeable
26916-001Interchangeable
interchangeable cross-reference
interchangeable
5007-0096Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 909001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 909001?
909001 is a BEARING,BALL,ANNULAR.
What parts can replace 909001?
There are 11 known substitutes for 909001: A1115, 700220, 702006 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 909001?
909001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-157-1893. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 909001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026