PartsTable
Technical Data Sheet
Download PDF

908C913-25 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

908C913-25: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 0.593 INCHES NOMINAL IN, material: STEEL COMP 304 OVERALL, hole_diameter: 0.128 INCHES NOMINAL IN, overall_height: 0.680 INCHES NOMINAL IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-934-9890, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
908C913-25
NSN: 5340-00-934-9890
FSC: 5340 — Hardware, Commercial
CAGE: 99167 — HAMILTON SUNDSTRAND CORPORATION (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length0.593 INCHES NOMINAL IN
materialSTEEL COMP 304 OVERALL
hole_diameter0.128 INCHES NOMINAL IN
overall_height0.680 INCHES NOMINAL IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.012 INCHES NOMINAL IN
loop/holding_dimension0.562 INCHES NOMINAL IN
distance_from_loop_center_to_end0.406 INCHES NOMINAL IN
material_document_and_classificationQQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5340-00-934-9890
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 908C913-25 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.593 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.562 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.406 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
•
WIDTH: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.680 INCHES NOMINAL IN
LENGTH0.593 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.562 INCHES NOMINAL IN
MATERIAL THICKNESS0.012 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.406 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH1.000 INCHES NOMINAL IN
MATERIALSTEEL COMP 304 OVERALL
HOLE DIAMETER0.128 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
6012-65ASame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
100-200-9-98Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 908C913-25?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 908C913-25?
908C913-25 is a CLIP,SPRING TENSION.
What parts can replace 908C913-25?
There are 2 known substitutes for 908C913-25: 6012-65A, 100-200-9-98. Substitute compatibility should be verified for your specific system.
What is the NSN for 908C913-25?
908C913-25 is cataloged in the U.S. Government catalog under NSN 5340-00-934-9890. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 908C913-25

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.