PartsTable
Technical Data Sheet
Download PDF

90895A003 — WASHER,SPRING TENSION

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

90895A003: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.106 INCHES NOMINAL IN, overall_height: 0.035 INCHES NOMINAL IN, hardness_rating: 38.0 ROCKWELL C NOMINAL, outside_diameter: 0.189 INCHES NOMINAL IN, style_designator: SPRING TENSION. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-692-3568, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
90895A003
NSN: 5310-01-692-3568
FSC: 5310 — Nuts and Washers
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.106 INCHES NOMINAL IN
overall_height0.035 INCHES NOMINAL IN
hardness_rating38.0 ROCKWELL C NOMINAL
outside_diameter0.189 INCHES NOMINAL IN
style_designatorSPRING TENSION
material_thickness0.020 INCHES NOMINAL IN
end_item_identificationF16
NSN5310-01-692-3568
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 90895A003 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 38.0 ROCKWELL C NOMINAL
•
STYLE DESIGNATOR: SPRING TENSION
•
OUTSIDE DIAMETER: 0.189 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
HOLE DIAMETER: 0.106 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.035 INCHES NOMINAL IN
HARDNESS RATING38.0 ROCKWELL C NOMINAL
STYLE DESIGNATORSPRING TENSION
OUTSIDE DIAMETER0.189 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
END ITEM IDENTIFICATIONF16
MATERIALSTEEL CORROSION RESISTING OVERALL
HOLE DIAMETER0.106 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
407660Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 90895A003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90895A003?
90895A003 is a WASHER,SPRING TENSION.
What parts can replace 90895A003?
There is 1 known substitute for 90895A003: 407660. Substitute compatibility should be verified for your specific system.
What is the NSN for 90895A003?
90895A003 is cataloged in the U.S. Government catalog under NSN 5310-01-692-3568. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90895A003

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.