PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 908794
908794 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include phase: SINGLE INPUT, inside_depth: 18.000 INCHES NOMINAL IN, inside_width: 18.000 INCHES NOMINAL IN, inside_length: 24.000 INCHES NOMINAL IN, tank_capacity: 30.000 GALLONS, fragility_factor: MODERATELY RUGGED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-186-1017, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
908794
NSN: 4730-01-186-1017
FSC: 4730
CAGE: 07524 — DOVER PUMPS & PROCESS SOLUTIONS SEGMENT INC DBA BLACKMER DIV BLACKMER (USA)
SPECIFICATIONS
phaseSINGLE INPUT
inside_depth18.000 INCHES NOMINAL IN
inside_width18.000 INCHES NOMINAL IN
inside_length24.000 INCHES NOMINAL IN
tank_capacity30.000 GALLONS
fragility_factorMODERATELY RUGGED
section_quantity1
special_featuresCLEANER, ULTRASONIC 30GAL, TANK DIMENSIONS 24"X18"X18";UNIT DIMENSIONS 36"X34"X36:ULTRASONIC POWER 1800WASTTS; HEATING POWER 6000WATTS;208V SINGLE PHASE 50/60HZ V
frequency_in_hertz60.0 INPUT
reliability_indicatorNOT ESTABLISHED
current_rating_in_amps0.350 SINGLE INPUT
part_name_assigned_by_controlling_agencyCLEANER ULTRASONIC 30GAL
NSN4730-01-186-1017
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: 908794 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
3494Interchangeable
interchangeable cross-reference
interchangeable
D3494-8Interchangeable
interchangeable cross-reference
interchangeable
3494-8Interchangeable
interchangeable cross-reference
interchangeable
3554Interchangeable
interchangeable cross-reference
interchangeable
6530NCM071326Interchangeable
interchangeable cross-reference
interchangeable
CH-2418Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 908794?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 908794?
908794 is a RESISTOR,VARIABLE,NONWIRE WOUND,.
What parts can replace 908794?
There are 6 known substitutes for 908794: 3494, D3494-8, 3494-8 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 908794?
908794 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-01-186-1017. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 908794

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026