PartsTable
Technical Data Sheet
Download PDF

90845A034 — WASHER,BEVEL

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

90845A034: WASHER,BEVEL.

The WASHER,BEVEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL, hole_diameter: 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN, overall_width: 1.250 INCHES NOMINAL IN, major_thickness: 0.344 INCHES NOMINAL IN, minor_thickness: 0.156 INCHES NOMINAL IN, style_designator: BEVEL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-369-8278, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
90845A034
NSN: 5310-01-369-8278
FSC: 5310 — Nuts and Washers
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL
hole_diameter0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
overall_width1.250 INCHES NOMINAL IN
major_thickness0.344 INCHES NOMINAL IN
minor_thickness0.156 INCHES NOMINAL IN
style_designatorBEVEL
surface_treatmentPASSIVATE OVERALL
flat_side_distance_between_thick_and_thin_edges1.250 INCHES NOMINAL IN
NSN5310-01-369-8278
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 90845A034 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MINOR THICKNESS: 0.156 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BEVEL
•
MAJOR THICKNESS: 0.344 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
FLAT SIDE DISTANCE BETWEEN THICK AND THIN EDGES: 1.250 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL
•
HOLE DIAMETER: 0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MINOR THICKNESS0.156 INCHES NOMINAL IN
STYLE DESIGNATORBEVEL
OVERALL WIDTH1.250 INCHES NOMINAL IN
MAJOR THICKNESS0.344 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
FLAT SIDE DISTANCE BETWEEN THICK AND THIN EDGES1.250 INCHES NOMINAL IN
MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL
HOLE DIAMETER0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 90845A034?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90845A034?
90845A034 is a WASHER,BEVEL.
What is the NSN for 90845A034?
90845A034 is cataloged in the U.S. Government catalog under NSN 5310-01-369-8278. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90845A034