PartsTable
Technical Data Sheet
Download PDF

90825A194 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

90825A194: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.110 INCHES NOMINAL IN, head_diameter: 0.373 INCHES NOMINAL IN, thread_length: 0.500 INCHES NOMINAL IN, screw_material: STEEL CORROSION RESISTING, fastener_length: 0.500 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-01-259-3534, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
90825A194
NSN: 5305-01-259-3534
FSC: 5305 — Screws
CAGE: 3A054 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.110 INCHES NOMINAL IN
head_diameter0.373 INCHES NOMINAL IN
thread_length0.500 INCHES NOMINAL IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.500 INCHES NOMINAL IN
special_featuresFURNISHED WITH AN O-RING LOCATED UNDER THE HEAD P/N 03-28-36
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNF
NSN5305-01-259-3534
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 90825A194 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.110 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.500 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: PAN NO. 2
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL CORROSION RESISTING
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.110 INCHES NOMINAL IN
FASTENER LENGTH0.500 INCHES NOMINAL IN
THREAD LENGTH0.500 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEPAN NO. 2
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL CORROSION RESISTING
SPECIAL FEATURESFURNISHED WITH AN O-RING LOCATED UNDER THE HEAD P/N 03-28-36
INTERNAL DRIVE STYLESLOT
THREAD QUANTITY PER INCH32
SUBSTITUTES & CROSS-REFERENCES 2
10465Reference document
Same NSN cross-reference
Reference document — Secondary reference
10465BIReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 90825A194?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90825A194?
90825A194 is a SCREW,MACHINE.
What parts can replace 90825A194?
There are 2 known substitutes for 90825A194: 10465, 10465BI. Substitute compatibility should be verified for your specific system.
What is the NSN for 90825A194?
90825A194 is cataloged in the U.S. Government catalog under NSN 5305-01-259-3534. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90825A194

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.