PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 90813030
90813030 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1025 OVERALL, end_radius: 0.406 INCHES NOMINAL IN, fork_depth: 1.875 INCHES NOMINAL IN, thread_class: 2B ROD CONNECTION, hole_diameter: 0.437 INCHES NOMINAL IN, overall_width: 1.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-254-4641, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
90813030
NSN: 5340-00-254-4641
FSC: 5340
CAGE: 52594 — STRATO-TOWER INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1025 OVERALL
end_radius0.406 INCHES NOMINAL IN
fork_depth1.875 INCHES NOMINAL IN
thread_class2B ROD CONNECTION
hole_diameter0.437 INCHES NOMINAL IN
overall_width1.000 INCHES NOMINAL IN
thread_length1.000 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.718 INCHES NOMINAL IN
fork_span_width0.500 INCHES NOMINAL IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
fork_arm_thickness0.250 INCHES NOMINAL IN
NSN5340-00-254-4641
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 90813030 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK ARM THICKNESS: 0.250 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.438 INCHES ROD CONNECTION IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD CLASS: 2B ROD CONNECTION
•
STYLE DESIGNATOR: CLEVIS
•
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END: 2.875 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FORK ARM THICKNESS0.250 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.438 INCHES ROD CONNECTION IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH1.000 INCHES NOMINAL IN
THREAD CLASS2B ROD CONNECTION
STYLE DESIGNATORCLEVIS
DISTANCE FROM PIVOT PINHOLE CENTER TO ROD CONNECTION END2.875 INCHES NOMINAL IN
FORK SPAN WIDTH0.500 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
FORK DEPTH1.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
SN1005Upgraded Successor
successor cross-reference
successor
2708-5AUpgraded Successor
successor cross-reference
successor
2-161-6Interchangeable
interchangeable cross-reference
interchangeable
L212781-2Interchangeable
interchangeable cross-reference
interchangeable
7227Interchangeable
interchangeable cross-reference
interchangeable
TYPE900DP5TInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 90813030?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 90813030?
90813030 is a CLEVIS,ROD END.
What parts can replace 90813030?
There are 24 known substitutes for 90813030: SN1005, 2708-5A, 2-161-6 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 90813030?
90813030 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-254-4641. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 90813030

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026