PartsTable
Technical Data Sheet
PartsTable / MRO / 908013
908013 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: STEEL OVERALL, body_width: 3.000 INCHES MAXIMUM IN, bore_shape: STRAIGHT, body_height: 2.250 INCHES MAXIMUM IN, body_length: 3.370 INCHES MAXIMUM IN, body_material: METAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3451, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 908013
NSN: 3110-00-156-3451
FSC: 3110
CAGE: 77060 — GENERAL MOTORS CORP PACKARD ELECTRIC DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_width3.000 INCHES MAXIMUM IN
bore_shapeSTRAIGHT
body_height2.250 INCHES MAXIMUM IN
body_length3.370 INCHES MAXIMUM IN
body_materialMETAL
bore_diameter13.00 MILLIMETERS NOMINAL MM
overall_width0.5000 INCHES NOMINAL IN
seal_quantity1
inclosure_typeENCASED
load_directionRADIAL
overall_length11.740 INCHES NOMINAL IN
NSN3110-00-156-3451
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 908013 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
BORE SHAPE: STRAIGHT
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.3940 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
SEAL QUANTITY: 1
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE SHAPESTRAIGHT
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.3940 INCHES NOMINAL IN
SURFACE FINISHGROUND
SEAL QUANTITY1
INNER RING WIDTH0.4800 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
8013Interchangeable
interchangeable cross-reference
interchangeable
700974Interchangeable
interchangeable cross-reference
interchangeable
717-004410Interchangeable
interchangeable cross-reference
interchangeable
570C-505Interchangeable
interchangeable cross-reference
interchangeable
7030070Interchangeable
interchangeable cross-reference
interchangeable
650375Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 908013?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 908013?
908013 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 908013?
There are 17 known substitutes for 908013: 8013, 700974, 717-004410 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 908013?
908013 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-3451. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 908013

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026