PartsTable
Technical Data Sheet
PartsTable / MRO / 908-26
908-26 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The MOTOR AND PINION AS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1335 OVERALL, head_style: HEXAGON, head_height: 0.219 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.812 INCHES MINIMUM IN, fastener_length: 2.562 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-270-7390, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 908-26
NSN: 5306-00-270-7390
FSC: 5306
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1335 OVERALL
head_styleHEXAGON
head_height0.219 INCHES NOMINAL IN
thread_class3A A
thread_length0.812 INCHES MINIMUM IN
fastener_length2.562 INCHES NOMINAL IN
hardness_rating27.8 ROCKWELL C MINIMUM AND 34.3 ROCKWELL C MAXIMUM OVERALL
special_featuresSILICONE BITE VALVE WITH POLYURETHANE COVER; REPLACEMENT BITE VALVE WITH COVER FOR USE WITH HYDRATION SYSTEM
thread_directionRIGHT-HAND
features_providedUNFINISHED HEAD
width_between_flats0.875 INCHES NOMINAL IN
end_item_identificationCENTRIFUGAL PUMP
NSN5306-00-270-7390
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 908-26 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.219 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.562 INCHES IN
•
WIDTH BETWEEN FLATS: 0.875 INCHES NOMINAL IN
•
HEAD STYLE: HEXAGON
•
THREAD QUANTITY PER INCH: 18
•
THREAD LENGTH: 0.812 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.219 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.562 INCHES IN
WIDTH BETWEEN FLATS0.875 INCHES NOMINAL IN
HEAD STYLEHEXAGON
THREAD QUANTITY PER INCH18
THREAD LENGTH0.812 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
MATERIALSTEEL COMP 1335 OVERALL
FEATURES PROVIDEDUNFINISHED HEAD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
908-26-1X2X4Interchangeable
interchangeable cross-reference
interchangeable
90826PC1-2Interchangeable
interchangeable cross-reference
interchangeable
908-26Interchangeable
interchangeable cross-reference
interchangeable
6229-03Interchangeable
interchangeable cross-reference
interchangeable
2035371Interchangeable
Same NIIN cross-reference
interchangeable
16613FInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 908-26?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 908-26?
908-26 is a MOTOR AND PINION AS. It is classified as a MRO (MRO_GENERAL).
What parts can replace 908-26?
There are 7 known substitutes for 908-26: 908-26-1X2X4, 90826PC1-2, 908-26 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 908-26?
908-26 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-270-7390. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 908-26

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026