PartsTable
Technical Data Sheet
Download PDF

907997 — NUT,PLAIN,CASTELLATED,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

907997: NUT,PLAIN,CASTELLATED,HEXAGON.

The NUT,PLAIN,CASTELLATED,HEXAGON is a the manufacturer industrial component. Key specifications include nut_style: CASTELLATED, HEXAGON, nut_height: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNF, thread_direction: RIGHT-HAND, countersink_angle: 109.0 DEGREES MINIMUM AND 111.0 DEGREES MAXIMUM NUT. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-167-1279, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
907997
NSN: 5310-00-167-1279
FSC: 5310 — Nuts and Washers
CAGE: 06848 — HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR) (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 317 OR STEEL COMP 347 OR STEEL COMP 410 OR STEEL COMP 414 OR STEEL COMP 416 OVERALL
nut_styleCASTELLATED, HEXAGON
nut_height0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
thread_directionRIGHT-HAND
countersink_angle109.0 DEGREES MINIMUM AND 111.0 DEGREES MAXIMUM NUT
surface_treatmentPASSIVATE OVERALL
width_across_flats0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
nominal_thread_size0.190 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch32
NSN5310-00-167-1279
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 907997 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 5 TYPE
•
NUT HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NONDEFINITIVE SPEC/STD DATA5 TYPE
NUT HEIGHT0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
COUNTERSINK ANGLE109.0 DEGREES MINIMUM AND 111.0 DEGREES MAXIMUM NUT
SUBSTITUTES & CROSS-REFERENCES 7
907997K35Reference document
Same NSN cross-reference
Reference document — Secondary reference
5310PL0138077Reference document
Same NSN cross-reference
Reference document — Informative reference only
404 120Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
091-20106C3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AN310C3Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-N-836Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 907997?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 907997?
907997 is a NUT,PLAIN,CASTELLATED,HEXAGON.
What parts can replace 907997?
There are 7 known substitutes for 907997: 907997K35, 5310PL0138077, 404 120 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 907997?
907997 is cataloged in the U.S. Government catalog under NSN 5310-00-167-1279. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 907997