PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 907859
907859 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WELDING MACHINE,ARC is a the manufacturer industrial component. Key specifications include phase: THREE, design_type: RECTIFIER, current_type: AC, power_source: ELECTRIC MOTOR, wattage_rating: 14.000 KILOWATTS, arc_current_type: AC. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-331-5144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
907859
NSN: 5310-01-331-5144
FSC: 5310
CAGE: A274N — SCANDINAVIAN MANUFACTURING SCAMA AB (SWE)
SPECIFICATIONS
phaseTHREE
design_typeRECTIFIER
current_typeAC
power_sourceELECTRIC MOTOR
wattage_rating14.000 KILOWATTS
arc_current_typeAC
special_featuresFULL FEATURE MODULE;1-375 INITIAL APM RANGE;0-15SEC INITIAL AMP TIME;DUAL RANGE PULSER .02-10PPS AND 10-500PPS;DIGITALAMP/VOLT METERS;DIMENSIONS HGHT34.25IN BY WDTH 13.875IN BY DEEP 24.313IN IN
voltage_in_volts200.0 OR 230.0 OR 460.0
horsepower_rating1.0
frequency_in_hertz60.0
output_current_rating_in_amps300.0 NOMINAL
rotational_speed_rating_in_rpm1750.0
NSN5310-01-331-5144
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 907859 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
37-888Interchangeable
interchangeable cross-reference
interchangeable
X-2Interchangeable
interchangeable cross-reference
interchangeable
16279Interchangeable
interchangeable cross-reference
interchangeable
907719Interchangeable
interchangeable cross-reference
interchangeable
907101Interchangeable
interchangeable cross-reference
interchangeable
5310PL0822902Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 907859?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 907859?
907859 is a WELDING MACHINE,ARC.
What parts can replace 907859?
There are 6 known substitutes for 907859: 37-888, X-2, 16279 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 907859?
907859 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-331-5144. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 907859

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026